Roper AL3132W, AL2121W Other Features, Laundry Load Guide, Rinse and spin Drain and spin

Other Features

Rinse and spin Drain and spin Manual-clean lint filter

Complete rinsing of fabrics washed with extra detergent may require an extra rinse and spin. To set for extra rinse and spin:

1.Push cycle control knob in.

2.Turn knob clockwise to one of the dots on the dial, as illustrated above. (Seearrows in drawing.)

3.Pull cycle control knob out. The washer will fill to selected level, agitate, drain and spin.

A dram and spin may help shorten drying times for somefabrics or hand- washed items by removing excess water.

1.Push cycle control knob in.

2.Turn clockwise to any bar located just before an OFF area on the dial, as illustrated above. (Seearrows in drawing.)

3.Pull cycle control knob out. The washer will drain and spin.

AL3132W

Clean the lint filter after every load.

1.Lift up agitator barrel.

2.Wash or wipe the filter clean (located in bottom of the agitator barrel). The filter is not removable.

3.Snapthe agitator back into place.

NOTE: On Model AL2121W, lint is washed out with existing wash water. If your washer drams into a tub, remove any lint collected in the tub or strainer.

Laundry Load Guide

Use highest water level for these suggested full-size loads.

Mixed Load	Heavy Work Clothes
2 double sheets or	2 pair pants
1 king-size sheet	3 shirts
4 pillowcases	3 pair jeans
6 T-shirts	1 coverall
6 pair shorts
2 shirts
2 blouses
6 handkerchiefs

Towels	Permanent Press	Knits	Delicates
8 bath towels	1 double sheet	2 slacks	2 camisoles
8 hand towels	1 tablecloth	2 blouses	4 slips
10 wash cloths	1 dress	4 shirts	2 panties
1 bathmat	1 skirt	4 tops	2 bras
	2 blouses	2 dresses	2 nighties
	2 slacks
	3 shirts
	2 pillow cases

Page 6