Rose electronic crystalview dvi pro fiber dvi/vga fiber extender Transmitter to receiver cabling

Refer to Figure 11 for the set-up for your system application.

A.1- Connect the appropriate CPU cable to the keyboard, video monitor and mouse ports on the CPU and to the corresponding ports on the transmitter.

2- Connect the transmitter to the receiver with cable defined for your system (CAT-5 or Fiber optic)

3- Connect the KVM stations keyboard, video monitor, and mouse cables to the corresponding connectors on the receiver unit.

B.1- Connect the appropriate CPU cable to the keyboard, video monitor and mouse ports on the CPU and to the appropriate

CPU connector on the switch.

2- Connect the appropriate KVM cable from the KVM port on the switch to the corresponding connectors on the transmitter.

3- Connect the transmitter to the receiver with cable defined for your system (CAT-5 or Fiber optic)

4- Connect the KVM stations keyboard, video monitor, and mouse cables to the corresponding connector on the receiver unit.

C.1- Connect the appropriate CPU cable to the keyboard, video monitor and mouse ports on the CPU and to the appropriate

CPU connector on the switch.

2- Connect the appropriate KVM cable from the KVM port on the switch to the corresponding connectors on the transmitter.

3- Connect the transmitter to the receiver with cable defined for your system (CAT-5 or Fiber optic).

4- Connect the appropriate CPU cable from the CPU port on the switch to the corresponding connectors on the receiver

5-Connect the KVM stations keyboard, monitor, and mouse cables to the corresponding connector on the receiver unit.

Transmitter to Receiver cabling

Cable type	Maximum distance
CAT-5	330’ / 100m
62.5µm MultiMode	600’ / 200m
50µm MultiMode	1,300’ /	400m
9µm SingleMode	33,000’	(6.25 miles) / 10km

Table 2. Transmitter to receiver cabling

16

CRYSTALVIEW PRO FIBER

INSTALLATION AND OPERATIONS MANUAL