Rose electronic Video Easyware manual Cables, DIN 5F

Label	Connector	Description
Power		“M” Chassis only
		DIN 5F
		Power adapter connector
None		“B” and “C” Chassis only
		IEC320
		Power receptacle w/switch
Link		DB9F – Expansion connector
		(Video expansion models only)
X =		DB25F – CPU connectors
CPU #
X =		DB25F – CPU monitor only
Video #		connectors
KVM-1		DB25F - KVM connector.
MONITOR		DB25F - KVM additional monitor(s)
RS232		RJ12
		6-conductor jack

Table 2. Rear panel connectors

Cables

Master to Slave unit cables

In systems needing additional CPUs, the MultiVideo can be cascaded to other MultiVideos. To cascade a MultiVideo to other “Slave” units, you will need one DB25M to DB25M, switch-to-switch cable for each cascaded unit.

The MultiVideo can also be expanded to add additional Video ports. A DB9M to DB9M, switch-to-switch cable is used with the MultiVideo video expansion units.

(Rose Electronics switch-to-switch cable part number CAB-CXVSMMnnn.) (See Appendix B for cable part numbers)

4MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL