SAFETY Vista L-Series Installation and Operations Manual
35
Safety
This Vista switch has been tested for conform ance to safety regulations
and requirements, and has been certified for internatio nal use. Like all
electronic equipment, the Vista switch should be used with c are. To
protect yourself from possible injury and to minimize the ris k of damage to
this Unit, read and follow these safety instructions.
Follow all instructions and warnings marked on this Unit.
Do not attempt to service this Unit yourself.
Do not use this Unit near water.
Assure that the placement of this Unit is on a stable surf ace or rack
mounted.
Provide proper ventilation and air circulation.
Keep the power cord and the connection cables clear of obstructions
that might cause damage to them.
Use only the power cords, power transformer and connectio n cables
designed for this Unit.
Use only a grounded (three-wire) electrical outlet.
Use only the power adapter designed for the Vista Switc h.
Keep objects that might damage this Unit and liquids that m ay spill,
clear from this Unit. Liquids and foreign objects might com e in contact
with voltage points that could create a risk of fire or ele ctrical shock.
Operate this unit only when the cover is in place.
Do not use liquid or aerosol cleaners to clean this Unit. Always unplug
this Unit from its electrical outlet before cleaning.
Unplug this Unit from the electrical outlet and refer ser vicing to a
qualified service center if any of the following conditio ns occur:
The power cord or connection cables is damaged or fra yed.
The Unit has been exposed to any liquids.
The Unit does not operate normally when all operating ins tructions
have been followed.
The Unit has been dropped or the case has been damaged.
The Unit exhibits a distinct change in performance, indic ating a need
for service.