User Manual | ||
|
|
|
|
|
|
RAID 5 (Parity)
This RAID array to be used on New/Blank hard drives. Striping will destroy existing data on the hard drive. Auto Configuration is recommended. For applications that require custom chunk size, Manual Configuration is offered.
Auto configuration (recommended)
The default chunk size is 64k when selecting Auto configuration.
1.As the BIOS boots press Ctrl+S or F4 when prompted to enter the RAID BIOS
2.At the next screen select Create RAID Set, then press Enter.
3.Select RAID5, then press Enter.
4.Select the number of drives then press Enter.
5.Select Auto configuration, then press Enter.
6.Input the RAID size, press Enter.
7.When asked Are You Sure(Y/N)?, press Y to accept.
8.Press Ctrl+E to exit the BIOS.
9.When asked Are you sure to exit(Y/N)?, press Y to exit and reboot
10.Continue with FDISK and FORMAT steps as if you were installing a conventional hard drive.
Manual configuration
1.As the BIOS boots press Ctrl+S or F4 when prompted to enter the RAID BIOS.
2.At the next screen select Create RAID Set, then press Enter.
3.Select RAID5, then press Enter.
4.Select the number of drives then press Enter.
5.Select Manual configuration then press Enter.
6.Select chunk size from 8k, 16k, 32k, 64k or 128k, then press Enter.
7.Select the first drive, press Enter.
8.Select the second drive, press Enter.
9.Select the third drive, press Enter.
10.If applicable select the 4th drive pressing enter after each selection.
11.Input the RAID size, press Enter.
12.When asked Are You Sure(Y/N)?, press Y to accept.
13.Press Ctrl+E to exit the BIOS.
14.When asked Are you sure to exit(Y/N)?, press Y to exit and reboot.
15.Continue with FDISK and FORMAT steps as if you were installing a conventional hard drive.
11
