Rosewill RC-302 user manual Installing drivers with existing Windows NT

1 ports Parallel PCI Adapter RC302 User Manual

5.at the “Browse” option, select

“CD-ROM(D) FOLDER “PCI_I/O\NM97X5\WIN9X” “OK” button

6.The “Update Device Driver Wizard” will appear, informing you that it has found the “NetMos PCI I/O Card” driver. Click the “Next” button.

.

7.Follow the instructions to finish up the drive installation.

.

8.Once Windows 9x has restarted, you can now connect your external devices to the PCI I/O card install the driver for the external devices, please refer to the external device user manual.

.

Windows NT 4.0

Using the existing hard disk controller in your system, you need to install the ATA/100 driver into Windows NT first. Without ATA/100 driver support, hard drive attached to the ATA/100 IDE controller card can not boot up Windows NT.

Installing drivers with existing Windows NT 4.0:

Make sure Windows NT 4.0 is properly installed into your system first.

Step 1: Start Windows NT 4.0.

Step 2: Insert Driver CD into the CD-ROM drive.

Step 3: Select “Run” option in Windows NT.

Step 4: At the “Run” option, click on the “Browse” button.

Step 5: At the Browse for Folder window:

1.Select “CD-ROM Drive (D)”

2.Select NetMosMultiIODrivers.exe

5