Rosewill RC403 user manual Modem Installation

PCI 56Kbps V.92 Data/fax Voice Modem Card RC403 User Manual

Installation Guide for Windows Series 98/98SE/ME/2000 and XP

System Requirements

•Computer with Pentium 200 MMX or higher processor.

•Windows 98/98SE/ME/2000 and XP Operating System.

•20 MB Hard Disk free space or above

•Sound card for voice features

•1 available PCI slot.

•CD-ROM drive.

Modem Installation

1.Please turn off your computer and disconnect the power cable.

2.Please remove the cover from your computer. Please check your computer¡¦s manual for instructions and cautions regarding the removal of covers or installation of add-in boards.

3.Please select an empty PCI slot and remove the appropriate expansion slot cover from the computer.

4.Please insert the Internal 56k Modem into the PCI slot and secure with a screw in the backplane.

5.Please replace the Computers cover.

6.Please insert one end of the telephone cord into the Modem¡¦s Line (top) Socket

7.Please connect the other end of the phone cord to a telephone phone point, via the supplied adaptor (RJ11) if required.

8.Please turn on your computer.

9.As Windows 98FE/98SE/2000/ME/XP starts it will detect that new hardware has been added, and start the ¡§Add New Hardware Wizard¡¨ Click on Cancel.

10.Please insert the analog Modem communication CD into your CD-ROM drive.

11.The CD should auto-start, displaying the following window. If it does not start, click on Start

-Run and type in CD:\autorun.exe (where CD is the drive letter of your CD-ROM drive.

12.Please select--Install Modem Driver. If you can not perform these procedures smoothly as above, please perform the file directly: CD:\Autorun.exe