Rosewill RNWA-PoE-100 user manual Connecting the PoE Injector, Chapter

PoE Injector RNWA-PoE-100 User Manual

Chapter 3

Chapter 3 Connecting the PoE Injector

You can use RNWA-PoE-100 PoE Injector with PD or PoE Splitter to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.

The following steps will tell you how to connect the PoE Injector correctly.

1.Use a CAT5 UTP cable to connect port of Ethernet device (such as a switch, hub or router) to the LAN IN port.

2.Please connect the power adapter properly to a power socket with provided power cable, and then connect the other end of the power adapter to the DC 48V port of the RNWA-PoE-100.

3.Connect the POWER+DATA OUT port of the RNWA-PoE-100 to a PD or a PoE Splitter with CAT 5 UTP cable.

Now, the device can work normally with data and power.

Here are some setup examples for the PoE Injector:

PoE Injector with the devices that support PoE:

6