Rosewill RNX-N180UB Chapter 3 Install Wireless Adapter

Wireless N Adapter RNX-N180UB User Manual

Chapter 3 Install Wireless Adapter

The wireless USB Adapter supports up to 300 Mbps wireless connection. This

USB adapter is fully compliant with the specifications defined in IEEE802.11n

standard. It is designed to complement USB2.0 computers and supports

Windows98SE/Me/2000/XP/Vista.

3.1 USB adapter Installation

The status LED indicators of the USB wireless adapter are described in the following.

 Lnk/Act ON (Green): Indicates a valid connection

 Lnk/Act Flashing: Indicates the adapter is transmitting or receiving data.

Figure 0-1

Install USB adapter

 Power on your PC, let the operating system boot up completely, and log in as

needed.

 Hold the adapter and insert it into a USB slot.

Figure 0-2

10

Contents

Main FCC STATEMENT FCC RF Radiation Exposure Statement CE Mark Warning National Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remark Page Table of Content Chapter 1 Overview Package Content 1.1 Overview of the Product 1.2 Features 1.3 System Requirement You must have at least the following Chapter 2 Installation Guide 2.1 Software Installation Page Page Chapter 3 Install Wireless Adapter 3.1 USB adapter Installation Page Chapter 4 Configuration Station Mode 4.1 General General Information Network Address Others 4.2 Profile 4.2.1 Add Page 4.2.2 Remove 4.2.3 Edit 4.2.4 Duplicate 4.2.5 Set default 4.2 Available Network Page Page Page 4.5.1 Method 1 PIN Input Config (PIN) 4.5.2 Method 2 Push Button Page Chapter 5 Configuration Access Point Mode 5.1 General 5.2 Advanced 5.3 Statistics 5.4 ICS Page FAQ 1. The Wireless USB Adapter does not work properly. 3. What should I do when the computer with the Adapter installed is unable to connect to the wireless network and/or the Internet?