Rosewill RNX-N180UB Chapter 5 Configuration Access Point Mode

Wireless N Adapter RNX-N180UB User Manual

Chapter 5 Configuration – Access Point Mode

We can use the wireless USB adapter to build an access point apart from the station mode.

The wireless client can connect to it if the wireless USB adapter is set to access point mode,

then you can share an Internet connection with others

Click Mode in the menu bar and select Access Point, then it will change to Access Point mode

automatically

5.1 General

General displays the basic information of this AP

Figure 0-1

 SSID:

The SSID of this AP

 BSSID:

The MAC address of this AP

 Association Table:

It displays the PC’s MAC address and life time that connect to this AP

 Config

26

Contents

Main FCC STATEMENT FCC RF Radiation Exposure Statement CE Mark Warning National Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remark Page Table of Content Chapter 1 Overview Package Content 1.1 Overview of the Product 1.2 Features 1.3 System Requirement You must have at least the following Chapter 2 Installation Guide 2.1 Software Installation Page Page Chapter 3 Install Wireless Adapter 3.1 USB adapter Installation Page Chapter 4 Configuration Station Mode 4.1 General General Information Network Address Others 4.2 Profile 4.2.1 Add Page 4.2.2 Remove 4.2.3 Edit 4.2.4 Duplicate 4.2.5 Set default 4.2 Available Network Page Page Page 4.5.1 Method 1 PIN Input Config (PIN) 4.5.2 Method 2 Push Button Page Chapter 5 Configuration Access Point Mode 5.1 General 5.2 Advanced 5.3 Statistics 5.4 ICS Page FAQ 1. The Wireless USB Adapter does not work properly. 3. What should I do when the computer with the Adapter installed is unable to connect to the wireless network and/or the Internet?