Rosewill RNX-N180UB Chapter 2 Installation Guide

Wireless N Adapter RNX-N180UB User Manual

Chapter 2 Installation Guide

2.1 Software Installation

 Insert the Driver and Utility CD-ROM into the CD-ROM driver.

 The Wizard should run automatically, and Figure 0-1 should appear. If not,

click the Start button and choose Run. In the field that appears, enter

D:\autorun.exe (if ‘’D’’ is the letter of your CD-ROM drive).

Figure 0-1

Next we use the USB wireless adapter installation steps as example. According to the PCI

wireless adapter installation steps, you can complete PCI wireless adapter installing

easily.

 Click Install Driver & Utility for USB Wireless Adapter on the Wireless

Client Configuration Utility dialogue box, and then select the installing

language from the next screen and click Next button.

7

Contents

Main FCC STATEMENT FCC RF Radiation Exposure Statement CE Mark Warning National Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remark Page Table of Content Chapter 1 Overview Package Content 1.1 Overview of the Product 1.2 Features 1.3 System Requirement You must have at least the following Chapter 2 Installation Guide 2.1 Software Installation Page Page Chapter 3 Install Wireless Adapter 3.1 USB adapter Installation Page Chapter 4 Configuration Station Mode 4.1 General General Information Network Address Others 4.2 Profile 4.2.1 Add Page 4.2.2 Remove 4.2.3 Edit 4.2.4 Duplicate 4.2.5 Set default 4.2 Available Network Page Page Page 4.5.1 Method 1 PIN Input Config (PIN) 4.5.2 Method 2 Push Button Page Chapter 5 Configuration Access Point Mode 5.1 General 5.2 Advanced 5.3 Statistics 5.4 ICS Page FAQ 1. The Wireless USB Adapter does not work properly. 3. What should I do when the computer with the Adapter installed is unable to connect to the wireless network and/or the Internet?