Wireless | User Manual | |
|
|
|
|
|
|
2.14 For OS of Microsoft Windows 95/ 98/ Me:
1.Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear.
Note: Windows Me users may not see the Network control panel. If so, select View all Control Panel options on the left side of the window
2.Move mouse and
3.Check the installed list of Network Components. If TCP/IP is not installed, click the Add button to install it; otherwise go to step 6.
4.Select Protocol in the Network Component Type dialog box and click Add button.
5.Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to install the TCP/IP protocol, it may need the Microsoft Windows CD to complete the installation. Close and go back to Network dialog box after the TCP/IP installation.
6.Select TCP/IP and click the properties button on the Network dialog box.
7.Select Specify an IP address and type in values as following example. IP Address: 192.168.1.1, any IP address within 192.168.1.1 to
192.168.1.253 is good to connect the Wireless LAN Access Point.
IP Subnet Mask: 255.255.255.0
8.Click OK and reboot your PC after completes the IP parameters setting.
2.15For OS of Microsoft Windows NT:
1.Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear.
2.Move mouse and
3.Check the installed list of Network Protocol window. If TCP/IP is not installed, click the Add button to install it; otherwise go to step 6.
4.Select Protocol in the Network Component Type dialog box and click Add button.
5.Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to install the TCP/IP protocol, it may need the Microsoft Windows CD to complete the installation. Close and go back to Network dialog box after the TCP/IP installation.
6.Select TCP/IP and click the properties button on the Network dialog box.
15
