Wireless | User Manual | |
|
|
|
|
|
|
| implemented to close the PPPoE connection while there are no data | |
| sent out longer than the idle time set. | |
| Manual connection type means to setup the connection through the | |
| PPPoE protocol by clicking the Connect button manually, and | |
| clicking the Disconnect button manually. | |
Idle Time | If you select the PPPoE and Connect on Demand connection type, | |
fill in the idle time for | ||
| between 1 and 1000 minutes. | |
MTU Size | Fill in the mtu size of MTU Size. The default value is 1400. | |
Attain DNS | Click to select getting DNS address for DHCP support. | |
Automatically | Please select Set DNS Manually if the DHCP support is selected. | |
Set DNS | Click to select getting DNS address for DHCP support. | |
Manually | ||
| ||
DNS 1 | Fill in the IP address of Domain Name Server 1. | |
DNS 2 | Fill in the IP address of Domain Name Server 2. | |
DNS 3 | Fill in the IP address of Domain Name Server 3. | |
Clone MAC | Fill in the MAC address that is the MAC address to be cloned. | |
Address | ||
| ||
Enable uPNP | Click the checkbox to enable uPNP function. | |
Enable IGMP | Click the checkbox to enable IGMP Proxy. | |
Proxy | ||
| ||
Enable Ping | Click the checkbox to enable WAN ICMP response. | |
Access on WAN | ||
| ||
Enable Web |
| |
Server Access on | Click the checkbox to enable web configuration from WAN side. | |
WAN |
| |
Enable IPsec |
| |
pass through on | Click the checkbox to enable IPSec packet pass through. | |
VPN Connection |
| |
Enable PPTP |
| |
pass through on | Click the checkbox to enable PPTP packet pass through. | |
VPN Connection |
| |
Enable L2TP |
| |
pass through on | Click the checkbox to enable L2TP packet pass through. | |
VPN Connection |
| |
Apply Changes | Click the Apply Changes button to complete the new configuration | |
setting. | ||
| ||
Reset | Click the Reset button to abort change and recover the previous | |
configuration setting. | ||
|
3.424 WAN Interface Setup – PPTP
36
