Wireless | User Manual | |
|
|
|
|
|
|
Item | Description | |
IP Address | If you select the Set Static DHCP on LAN interface, fill in the IP | |
address for it. | ||
| ||
MAC Address | If you select the Set Static DHCP on LAN interface, fill in the MAC | |
address for it. | ||
| ||
Comment | Fill in the comment tag for the registered Static DHCP. | |
Apply Changes | Click the Apply Changes button to complete the new configuration | |
setting. | ||
| ||
Reset | Click the Reset button to abort change and recover the previous | |
configuration setting. | ||
| ||
Static DHCP List | It shows IP Address MAC Address from the Static DHCP. | |
Delete Selected | Click to delete the selected clients that will be removed from the | |
Static DHCP list. | ||
| ||
Delete All | Click to delete all the registered clients from the Static DHCP list. | |
Reset | Click the Reset button to abort change and recover the previous | |
configuration setting. | ||
|
3.42 WAN Interface Setup
This part is used to configure the parameters for wide area network that connects to the WAN port of your WLAN Broadband Router. Here you may change the access method to Static IP, DHCP, PPPoE or PPTP by click the item value of WAN Access Type.
3.421 WAN Interface Setup - Static IP
31
