Internet Camera
7. View | If IPWizard II finds network devices, View button will be available. Please |
(One click to view the | select the device you want to view and click the View button. Then you |
video from the | could see the video from camera directly. |
IPWizardII directly) |
|
8. LAN | In case you want to change the IP related parameters of wired interface, |
| please select the device you want to configure and click the LAN button. |
| Further description will be show at below. |
|
|
9. Wireless | In case you want to change the IP related parameters of wireless interface, |
(For | please select the device you want to configure and click the WIRELESS |
| button. Further description will be show at below. |
|
|
10. EXIT | This will close the IPWizard II window. |
11. Model Name | This shows you the device model name. |
|
|
12. Network | This tells you what your connection type is; wired or wireless. |
13. DHCP | Here tells that whether your camera is under the DHCP IP or Static IP. |
14. WiFi | This tells you what your connection type is; Ethernet only or wireless. |
|
|
15. Connection | Shows if your connection is successful |
- LAN:
Here you can set the IP of the camera to be either by Static or DHCP base on your needs. It is recommended and by default to use DHCP as your IP address of the camera.
You could modify the relative settings of the selected device. Click “<<” button will quit the LAN setting procedure and click “>>” button will move to next page as below.
10
