Rosewill RXS-3323 manual Connecting to the Camera, Using IPWizard

Internet Camera RXS-3323/RXS-4324 Quick Installation Guide

Connecting to the Camera

Using IPWizard II:

After the installation of the IPWizard II, double click on the icon, you will see this window popup as the basic management of the IPWizard II. Once it popup, the wizard will perform an auto search to see if you have any camera in the Network.

The window below is an example of what this may look like:

1.	Device Title	This part shows the Device name found in the network
2.	IP address	Here shows the IP address of the found Camera
3.	Port	Here shows the Port used of the found Camera

4.Minimize and Close The orange circle will minimize the window and the red circle will close

Window	this window
5. MAC	This shows the MAC address of your Camera

Double Click on the above information bar will open up the Camera

	management page in your default Web Browser.
6. Search	When launch the IPWizard II, a searching window will pop up. IPWizard II
	is starting to search Network Cameras on the LAN. The existed devices will
	be listed.

9