Rosewill RXS-3323 Hardware Installation, Camera LAN and Power Installation, Ceiling Mount

Internet Camera RXS-3323/RXS-4324 Quick Installation Guide

Installation

Hardware Installation:

-Camera LAN and Power Installation:

1.Please use cable connection for the first time setup. Using the RXS-4324 as example, please connect an Ethernet cable to the LAN socket located on the camera’s rear and attach it to the network.

2.Connect the attached power adapter to the DC power jack of the camera. Note: Use the power adapter, 12VDC, included in the package and connect it to wall outlet for AC power.

3.Once you have installed the camera well and powered it on, the power LED will turn on. It means the system is booting up successfully. Furthermore, if you have a proper network connection, and access to the camera, the LED will flash blue under wired mode.

- Ceiling Mount:

1. Fix the camera to L-type bracket with 2.	Fix the bracket and camera to the
the two supplied screws	ceiling using two wall anchors and
	screws

5