Rotel RDV-1040 owner manual To Resume Playback, To Rapidly Advance or Reverse Playback

To Resume Playback

When the resume mode is ON

While the disc that you interrupted playback

of is still on the disc tray, press (PLAY)

28. The RDV-1040 resumes playback from the position where playback was interrupted. The TV screen shows RESUME PLAY.

To play back from the beginning of the disc ■

(STOP) 9 before pressing ￿ (PLAY)

28.

When the resume mode is DISC RESUME

Press the OPN/CLS button on the front panel or the OPEN/CLOSE button 2 on the remote control to open the disc tray and in- sert a disc for which the RDV-1040 has stored an interrupted position. The TV screen shows

RESUME STOP.

Press (PLAY) 28 . The TV screen shows RESUME PLAY and the RDV-1040 resumes playback from the position where playback was interrupted.

To play back from the beginning, after insert-

ing the disc, press ■ (STOP) 9			before
pressing	(PLAY) 28	to start playback.

NOTES:

If you change the RESUME setting from DISC RESUME to OFF or ON, you cannot resume playback of a disc whose “resum- ing” position is stored. However, when you reset RESUME to DISC RESUME, you will then be able to resume playback of the disc.

If you interrupt the playback of a disc for which an interrupted position has already been stored, the memory will be updated with the new interrupted position.

For a double-sided DVD VIDEO disc, the RDV-1040 regards each side as a different disc. Therefore, to resume playback of such a disc, the disc must be inserted with the same side down.

When the RDV-1040 memorizes an inter- rupted point for a disc, it also memorizes Audio, Subtitle and Angle settings.

The RDV-1040 may not resume playback exactly from the interrupted point. In the case of an SVCD/Video CD disc with PBC function, the RDV-1040 may resume play- back from a point slightly earlier or later than the point where playback was inter- rupted.

13

Various Speed Playback

To Rapidly Advance or

Reverse Playback

During playback, press 29 or 10 on the remote control unit. You can select from

1.5times, 5 times, 20 times and 60 times nor- mal speed. Pressing (PLAY) 28 returns the RDV-1040 to normal playback.

During playback, hold down 8 or

26. Playback is advanced or reversed at 5 times normal speed.

During rapid playback, the sound is muted ex- cept when playing an Audio CD, and when playing a DVD VIDEO or Video CD at 1.5 times normal speed. For Audio CD discs, the sound is heard intermittently.

1.5x Quick Playback With Sound

When you select 1.5 times normal speed play- back, the disc is played back with sound.

•For DVD VIDEO discs, the subtitles remain on.

•If the sound of a DVD VIDEO disc is recorded in Dolby Digital or DTS format, stereo lin- ear PCM signals are output. With some DVD VIDEO discs, the sound quality and volume may be altered, or the sound may be out of tune.

•To switch from rapid reverse playback to x1.5

Quick Playback, first press (PLAY)

28 , then press 29 once.

To Advance a Still Picture Frame by Frame

With disc play paused, press II (PAUSE) 27 . Each time you press II (PAUSE), the still picture advances to the next frame. Press (PLAY) 28 to return to normal play- back.

English

To Play Disc in Slow Motion

You can select from 1/32 times, 1/16 times, 1/4 times and 1/2 times normal speed.

During playback, press II (PAUSE) 27 , then

press 29 (to play forward slow motion),

or 10 (to play reverse slow motion, for DVD VIDEO disc only). Pressing (PLAY) 28 returns to normal playback.

•During slow motion playback, the sound will be muted.

•Reverse slow motion playback is not pos- sible for an SVCD and Video CD.

Locating the Beginning of a Scene or Song

For DVD VIDEO: During playback, you can skip a chapter or title, depending on the disc configuration.

For SVCD/Video CD: During playback with- out PBC function, you can skip a track –

For Audio CD: During playback or while in stop mode, you can skip a track –

To skip forward, press 26 .

To skip backward, press 8 .