15 English
2Press / to move to , then press
ENTER. The pull-down menu for entering time
appears.
Screen example for DVD VIDEO
1/3 1/3OFF 1/5
8.5Mbps
TITLE 33 TOTAL 1:25:58CHAP 33
CHAP.
TIME _:__:__
Screen example for Audio CD
OFF PROG. RND.
TIME 25:58TRACK 33
TIME __:__
3Press the numeric buttons (0 to 9) to enter
the desired time. The specified time is dis-
played in the pull-down menu.
Example (for DVD VIDEO)
To playback from 2(H):34(M):00(S), press 2,
3, then 4.
Example (for SVCD/Video CD/Audio
CD
To playback from 23(M):40(S), press 2, 3, then
4.
You do not have to press “0” to enter the trailing
zeros (for the last two digits in the example
above).
To correct a mistake press repeatedly to move
back to the digit where you entered a wrong
number, and reenter the correct one.
4Press ENTER
34
. The RDV-1040 starts play-
back from the specified time.
To dismiss the menu bar press ON SCREEN
33
.
NOTES:

“10” and “+10” buttons are not used with

this function.

Some DVD VIDEO discs do not contain

time information, and the time search func-

tion cannot be used.

The time search function cannot be used

during program playback.

Changing Playback Order

Playing Tracks in a Specific

Order (Program Play)

By programming tracks, you can play up to
99 tracks in any order. You may program the
same track more than once.
1In stop mode, press ON SCREEN
33
twice.
The menu bar appears on the TV screen.
2Press / to move to
PROG.
.
Screen example for Audio CD
OFF PROG. RND.
TIME 25:58TRACK 33
3Press ENTER
34
. The program table ap-
pears. The PRGM indicator lights up in
the display window.
4Press the numeric buttons to specify tracks
in the desired order.
Examples:
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
To correct the program press / to move
to the track to be corrected, then press TV/
VIDEO - CANCEL
22
. The track is erased and
the subsequent programmed tracks move up.
Pressing ■ (STOP)
9
clears all the pro-
grammed tracks.
5Press (PLAY)
28
to start program play-
back. With an Audio CD disc, the program
table remains on the TV screen during pro-
gram playback. (Pressing ON SCREEN
33
brings up the status bar.)
When all of the programmed tracks have
finished playback, the RDV-1040 stops and
the program table appears again. Note that
the program remains.

NOTE: During program playback, you

cannot edit the program contents.

To Check the Program Contents
During playback, press ■ (STOP)
9
. Play-
back stops and the program table is shown.
When the RDV-1040 is playing back an Au-
dio CD and the program table is not shown,
you can bring up the table by carrying out steps
1 to 3.
During SVCD/Video CD playback, you can
check the program contents via the menu bar.
To stop program playback
Press ■ (STOP)
9
.
To clear the program
While stopped and the program table is shown,
press ■ (STOP)
9
.
To exit the program mode
After clearing the program, press ON SCREEN.
NOTE: When the disc tray is opened or the
RDV-1040 is turned off, the program is
cleared.

To Play Tracks in Random

Order (Random Play)

1In stop mode, press ON SCREEN
33
twice.
The menu bar appears on the TV screen.
2Press / to move to .
Screen example for Audio CD
OFF PROG. RND.
TIME 25:58TRACK 33
3Press ENTER. The RDV-1040 starts random
playback.
With an SVCD/Video CD disc, the menu bar
is automatically dismissed.
During random playback, the RND indicator
lights up in the display window.
After playing all tracks of the disc, the
RDV-1040 stops the disc and exits the random
playback mode.
To stop and quit random playback
Press ■ (STOP)
9
. The RDV-1040 stops
playback and exits the random playback mode.