24 |
DOWN MIX Mode
The
To change DOWN MIX MODE setting:
•On the PREFERENCE 2 screen, use the
CURSOR buttons to move the over the DOWN MIX MODE item.
•Press the CURSOR buttons to choose the desired setting.
Lt/Rt: Downmixes the full 5.1 channel sig- nal into an encoded
Lo/Ro: Downmixes the 5.1 channel signal to a conventional
OFF: Supplies the full 5.1 channel signal to the analog audio outputs. Use this setting for surround processors that have 5.1 channel audio inputs. This setting must be used when you select the 5.1 CHANNEL or EXPERT setting in the SPEAKER SETTING preferences.
NOTE: The DOWN MIX feature does not work when the VSS function is activated.
To change the COMPRESSION setting:
•On the PREFERENCE 2 screen, use the
CURSOR buttons to move the over the COMPRESSION item.
•Press the CURSOR buttons to choose the desired setting.
ON: Activates the Compression feature (only for DVD Video Discs with Dolby Digital recordings).
OFF: No compression. Full dynamic range.
DTS BASS MANAGEMENT Setting
Settings described later in this section enable you to match the
To change the setting:
•On the PREFERENCE 2 screen, use the
CURSOR buttons to move the over the DTS BASS MANAGEMENT item.
•Press the CURSOR buttons to choose the desired setting.
OFF: This is the default setting for DTS re- cordings. Overrides the speaker settings and treats all speakers as “large”.
ON: All speaker settings are effective, even when playing a DTS recording. Although this setting will not match the full DTS speci- fication, it may be preferred if you have small speakers that cannot handle signifi- cant bass information.
AUTO STANDBY Setting
The
•Press the CURSOR buttons to choose the desired setting.
60:Puts the unit in standby mode after 60 minutes of inactivity.
30:Puts the unit in standby mode after 30 minutes of inactivity.
OFF: The Auto Standby function is disabled. The unit will stay on until it is manually put in standby mode.
SCREEN SAVER Setting
TV Monitors can be easily damaged if a static image is displayed for a long time. The Screen Saver feature automatically replaces a steady image with a safer image following several minutes of inactivity. There are four optional settings.
To change the setting:
•On the PREFERENCE 2 screen, use the CURSORbuttons to select the SCREEN SAVER field.
•Press the CURSOR buttons to choose the desired setting.
MODE 1: The Screen Saver image ap- pears and “scrolls”.
MODE 2: The Screen Saver image ap- pears and does not scroll.
DIMMER: The existing image is darkened to protect the screen.
OFF: The Screen Saver function is disabled.
NOTE: If Mode 1 causes picture instability with your TV, select a different mode.
SPEAKER Settings
The SPK. SETTING page of the PREFERENCES DISPLAY provides a simple “5.1 CHANNEL” or “2 CHANNEL” selection that is adequate for most users to configure the output of the
COMPRESSION Setting
When playing a Dolby Digital DVD Video Disc, the
To change the setting:
•On the PREFERENCE 2 screen, use the
CURSOR buttons to select the AUTO STANDBY item.
to more detailed configuration options.