Starting the engine
Refer to the engine manufacturer owner’s manual for detailed starting procedure.
Ensure that the engine oil is at the correct level and that the fuel tank is full of fresh unleaded petrol.
∙Move the throttle control lever to the “FAST” position.
∙Prime the engine in accordance with the engine manufacture’s instructions
∙Grasp the starter cord handle and pull with a quick firm action. Allow the starter cord to recoil back into its housing whilst retaining a grip on the handle. If the engine fails to start repeat till the engine starts
Stopping the engine
Move the throttle control lever to the “STOP” position O
Wait till the engine comes to a complete stop before removing or fitting the grass catcher to the mower or attempting any maintenance work on the mower.
MAINTENANCE
WARNING
Before carrying out any maintenance on the mower remove the spark plug lead from the spark plug to prevent accidental starting
Engine air cleaner
Refer to the engine manufacturer owner’s manual for detailed maintenance instructions.
The engine air cleaner elements must be serviced after every 25 hours of normal mowing. The elements must be serviced more regularly if the mower is used in dusty conditions. Replace immediately if the element is damaged.
Spark plug
Refer to the engine manufacturer owner’s manual for detailed maintenance instructions.
For best results, remove the spark plug every 50 hours for gap checking and replace every 100 hours of use. Replace the spark plug at any time if it is found that the electrodes are pitted or burned or the porcelain cracked. For replacement refer to engine manufacturer owner’s manual for correct spark plug.
Muffler
Check the condition of the muffler periodically for rust and cracks. Replace if found to be damaged as this can lead to increased exhaust noise. Replace only with a genuine original equipment part.
Blade- refer figure 4
Check the condition of the blades and central fastener at regular intervals, or after striking a solid object, or if the mower begins to vibrate abnormally. The blades with use, will loose their sharp edge and the quality of the grass finish will deteriorate. When this happens the blades should be replaced in sets.
CAUTION
Blades must be replaced in sets to maintain balance
6
