CONTROLS
1. THROTTLE CONTROL
1 | 2 | |
| ||
Mounted on the control panel and connected to the |
|
|
engine carburettor controls. Has the symbols for Slow, |
| |
Fast and Choke. Fig. 6 |
| |
2. IGNITION SWITCH |
| |
This switch is part of the battery ignition system and has |
| |
three positions marked for Off, On and Start. The switch |
| |
is key operated and automatically returns to the On |
| |
position from the Start position when released. Fig. 6 |
| |
3. BRAKE/ CLUTCH |
| |
Foot operated pedal on the left side of machine. |
| |
Depressing the pedal neutralises the drive belt and |
| |
Fig. 6 | ||
engages the Brake Disc. Fig. 7 | ||
| ||
4. PARKING BRAKE |
| |
Hand operated knob left hand side. Depressing the |
| |
brake/clutch foot pedal enables this knob to be engaged |
| |
and disengaged. Brake is locked on with knob in up |
| |
position. Fig. 7 |
| |
5. DRIVE SELECTION |
|
Foot operated right hand side. Depress with toe pressure gives forward motion, depress with heel gives reverse motion. Automatically returns to neutral position when foot is removed. Fig. 7
6. CUTTING HEIGHT ADJUSTER
Located on right side of seat. (Fig. 7) with low cut at bottom and high cut at the top setting. Fig.7
5
3
4
7. CUTTER DRIVE
Lever located on left hand side of seat mounting box. Down position disengages blade drive and applies blade brake, up position engages blades. Fig. 7
7
Fig. 7
6
5
