Rover 53179 warranty Air Cleaner

7.Dirt or abrasives entering the engine via the oil filler tube due to-

(a)Using a funnel not cleaned of dirt or grit, or, (b)Topping up with contaminated oil stored in an

unclean container.

8.Lack of oil. It is important to-

(a)Check the oil level regularly (Every 5 hours of operation)

(b)Maintain a full sump.

Periodically check the machine and the cutting mechanism. If parts are worn or need replacing do so by using only Genuine Rover Replacement parts.

Before working on the mower, disconnect the spark plug lead from the spark plug and place it where it cannot contact the spark plug.

Check your Rover Ranger frequently for loose nuts, bolts, belts, etc., and keep these items correctly tightened and adjusted.

CAUTION

Petroleum solvents, such as kerosene, are not to be used to clean cartridge. They may cause deterioration of the cartridge.

DO NOT OIL CARTRIDGE. DO NOT USE PRESSURIZED AIR TO CLEAN OR DRY CARTRIDGE.

AIR CLEANER

Refer to engine manufacturer’s manual for detailed instructions.

1.Pull up on air cleaner cover handle and rotate towards engine.

2.Remove air cleaner cover.

3.Carefully lift air cleaner cartridge and pre-cleaner from blower housing.

Note: To clean pre-cleaner, wash in soapy water. Squeeze dry in a clean cloth. DO NOT OIL.

4.Tap the air cleaner on a flat surface to dislodge any loose debris. If contaminated, replace.

5.Clean the base of the air cleaner cartridge area carefully to prevent any debris from entering engine.

6.Place the air cleaner pre-cleaner and cartridge into the blower housing. The cartridge must fit securely in base.

7.Align the tabs on the cover with the slots in the blower housing and replace the cover.

8.Hook the handle and close the cover.

7