DG580
The DG580 allows steam output to be adjusted.
●setting on the iron : the steam control dial should be set to min.
●● setting on the iron : the steam control should be set a the mid level
●● ● setting on the iron : the steam control dial can be set to the max.
Type of fabric | Iron thermostat | Steam control |
| setting | dial setting |
Synthetic
Viscose
Polyester
● (low temperature)
Silk
Wool
● ●(medium temperature)
Cotton
Linen
● ● ● (high temperatures)
Note: It is normal for the connection cord to become warm during use.
DRY IRONING
This appliance can be used for dry ironing if the steam button is not pressed.
MDG 560: Set the temperature control dial on the iron for the type of material being ironed.
MDG 580: Set the iron’s on/off switch to the on position. Do not turn on the steam switch.
VERTICAL STEAM
MTo remove wrinkles in cotton or
linen, the soleplate can come in contact with the fabric for optimal results.
M For synthetic fabrics, a distance of 4 inches is recommend to avoid damage to the garment.
M For delicate fabrics, we recommend carrying out a test on an unobtrusive part of the garment (inner seam).
Caution:
Steam produced is very hot. To avoid burns and scalding never iron or steam clothes while they are being worn.
1.Fill iron according to the Filling the Boiler section of instructions.
2.DG 560 model: Press the on/off switch (A) on the control panel and the steam indicator light will turn on. Set the temperature control dial on the iron to the (● ● ●) setting.
