Use
Warning: Never steam a garment while it is being worn. The hose and steam head may become hot during use.
This is perfectly normal. Be careful and avoid any prolonged contact.
•Only operate the steamer on the floor clear of any materials which may obstruct
the base of the steamer (flat and horizontal surface). Do not obstruct the orifices on the lower part of the appliance.
• Depending on the model the steam amount can be set to the desired level with the variable steam control.*
• If necessary, expand the poles to the desired height by unlocking them. Gently pull the hanger with the hand and lock the poles to the desired height with the other hand. Take care not to jam the double poles by pulling them asymetrically.
• Plug in the power cord and turn on the power using the foot operated pedal. The power light will illuminate. The steamer is operating.
• The unit will produce steam in 60 seconds.
• Put garment onto the hanger head. Grasp the steam head with the steam vents pointing away from you. Start steaming by touching material lightly with steaming head and moving in an up/down vertical motion. Beginning at the top of the garment move in a downward direction. Always steam in a vertical position.
•During use, the hose may make a gurgling noise. This is normal and caused by condensation. If you hear the gurgling noise, hold the hose up to direct the condensation back into the appliance.
Warning: Do not allow the steamer to run dry.
Warning: Never use the steamer more than 3 hours.
*Depending on the model: these accessories are specific to certain models or available as an option.
7
