2
IMPORTANT SAFEGUARDS
When using your iron, basic safety precautions should
always be followed, including the following:
Read all instructions before using the iron.
1. Use iron only for its intended use.
2. To protect against a risk of electric shock, do not
immerse the iron in water or other liquids.
3. The iron should always be turned to minimum
(min) before plugging or unplugging from outlet.
Never yank cord to disconnect from outlet, instead
grasp plug and pull to disconnect.
4. Do not allow cord to touch hot surfaces. Let iron
cool completely before putting away. Loop cord
loosely around iron when storing.
5. Always disconnect iron from electrical outlet when
filling iron with water, emptying iron or when not in
use.
6. Do not operate iron with a damaged cord or if the
iron has been dropped or damaged. To avoid the
risk of electric shock, do not disassemble the iron,
take it to the nearest authorized Rowenta Appliance
Service Center for examination and repair. Incorrect
reassembly can cause a risk of electric shock when
the iron is used.
7. Close supervision is necessary for any appliance
being used by or near children. Do not leave iron
unattended while connected or on an ironing board.
8. Burns can occur from touching hot metal parts, hot
water or steam. Use caution when you turn a steam
iron upside down – there may be hot water in the
reservoir.
9.
The use of accessory attachments is not recommended
by Rowenta Appliance Company and may result in fire,
electric shock or personal injury.