Vapodur® Valve
The patented Vapodur® valve ensures that the opening which allows the water to drip from the water tank into the steam chamber remains unaffected by hard water deposits.
To ensure your iron continues to steam efficiently the valve MUST be opened and closed a few times. This is done by moving the variable steam control left to right a few times every time you finish ironing.
Steam Chamber Cleaning Function
This function allows loose mineral deposits and other impurities that build up inside the iron to be flushed out. This type of self cleaning only needs to be carried out occasionally and never more than once a month.
M Fill the iron with cold tap water and set variable steam to min.
M Stand on heel and plug in.
M Set thermostat dial to maximum position.
M When the iron reaches the correct temperature, indicator light will go out, unplug iron.
M Hold iron horizontally over the sink with soleplate pointing away from body.
MPress and hold down the self clean button for about 1 minute.
WARNING: Doing this will cause steam and hot water to be ejected from the soleplate. Take all proper precautions and hold iron away from body.
MMove the iron gently back and forth and side to side until all water has run through.
MCarefully wipe all water and material from the soleplate with an old folded towel, as the water and minerals can stain the soleplate (although this has no effect on glide or performance).
WARNING: Iron and soleplate may still be hot, exercise care while wiping.
MPlace iron on heel and leave to cool. Turn temperature dial to minimum.
MIMPORTANT: before using the iron after self cleaning, test steam and burst of steam on an old towel or cloth to ensure all loose material has been removed from the iron.
DM 253/273/293 | 9 |
