Royal Sovereign ARP-1200M OPERATION for electronic unit, Setting mode/function, Control panel

ARP-1200M / ARP-1200DM ARP-1200E / ARP-1200DE

OPERATION for electronic unit

Control panel

1. 'Heating operation indicator (For ARP-DM, ARP-DE)

2. Fan operation indicator

3. Cooling operation indicator

4. Automatic mode indicator

FIG.16

5.' Set temperature' indicator

6.'Room temperature' indicator

7.High ventilation indicator

8.Low ventilation indicator

9.Timer operation indicator

10.Sleep function indicator

11.Compressor operation indicator

12.Mode (function) option button

13.'Temperature up' button

14.'Temperature down' button

15.Speed (ventilation) button

16.Sleep button

17.Timer button (1~12 hours)

18.ON/OFF(power) button

19.Receiver

20.Display window

Turning ON/OFF

Press ON/OFF button, the unit will start automatically. If the ambient temperature is

-Higher than 75 oF / 24 oC, the unit will work in cooling mode.

-Higher than 68 oF / 20 oC, but below or equal to 75 oF / 24 oC, the unit will work in ventilation mode.

-Below 68 oF / 20 oC, the unit will work in heating mode (Only for units ARP-1200 DM/DE)

Indicators of the functions in progress will be lit. *NOTE: The COMPRESSOR indicator will only light up when the compressor is in operation. The display window shows the ambient room temperature.

To turn the unit off, press the ON/OFF button again.

Setting mode/function

Press MODE button to select required working mode: automatic, cooling, fan or heating, (heating is only available for DM and DE units). The indicator of your selected mode will be lit.

Auto mode is factory preset at 75 degrees. When in auto mode(auto and cool light illuminated) the temp up and temp down buttons are disabled and you cannot set a desired temperature. If you want a desired temperature above or below 75 run unit in cool mode and set your desired temperature by pressing the temp up or temp down buttons.

9