Royal Sovereign ARP-5012XH, ARP-5010X owner manual Operation

Operation

Control Panel

Warning Light

Power control

LCD display Timer control Timer/ Temperature set control

Fan speed control

Mode control

Indication Symbols on LCD Display

Cooling mode	High fan speed
Dehumidify mode	Med fan speed
Fan only mode	Low fan speed

Heating mode (only ARP-5012XH)

Display set temperature

Warning light the machine will stop running Display timer setting of auto switch on/off

Power Control

The power control turns the unit on and off. When you press the control button, the unit begins to operate.

Mode Control

The Mode Control has 3 settings (4 settings on 5012XH).

Cool Mode

Cool Dehumidify

(Heat) Fan

Press the Mode button to select the Cool mode. When in Cool mode the symbol will show on the display. During operation, the unit displays “present room temperature”. The temperature range settings are between 60~89°F

A. In Cool mode, use the “+” or “-“ button to adjust and set the desired temperature for the room. After 10 seconds the display will return back to the current room temperature. B. To choose between Celsius and Fahrenheit readings, press the “+” and “-” buttons at the same time for 3 seconds.

Note: The two air exchange hoses must be vented through window kit when in this mode.

Dehumidify Mode

Press the Mode button to select Dehumidify mode. When in Dehumidify mode the symbol will appear on the display. When the dehumidify mode is on, the temperature buttons do not function. The fan speed can be adjusted only if the temperature in the room is higher then 77° F. If it is below this temperature, the fan speed is automatically fixed to “low” and cannot be adjusted. When the humidity in the room is 50% or lower, the compressor will not run and the unit will not dehumidify.

NOTE: The exhaust hose must be connected to remove the humidity.

Fan Mode

Press the Mode button to select Fan mode. When in the Fan mode, the symbol will appear. The air is circulated throughout the room with no cooling.

8