ES-400C
COLD LAMINATING PROCEDURE
1.Turn the power switch to the cold position (" ="). The power indicator light will not light, but the machine is now ready to laminate in the cold mode.
2.Place the document to be laminated on the adhesive side of the cold film with the document face down.
3.Insert the document to be laminated into the front opening of the machine.
4.Remove paper liner from the cold film slowly while the document is being inserted into the machine.
NOTE: When switching the machine from the hot to cold mode, it will take approximately 30 minutes for the ready indicator light to turn off. Please wait for the light to turn off before inserting your document.
6
