Royal Sovereign RHD-2201 owner manual Paperg Temp ˚C

					RHD-2201
	FILM SETTINGS -Based on 25˚C-
Film Thickness			Paper(g)	Temp(˚C)	Speed
75 mic ( 3 mil )		80		90	6
			120	90	5
			200	90	4
100 mic ( 4 mil )		80		95	7
			120	95	6
			200	95	4
125 mic ( 5 mil )		80		100	7
			120	100	6
			200	100	4
150 mic ( 6 mil )		80		105	7
			120	105	6
			200	105	4
175 mic ( 7 mil )		80		110	6
			120	110	5
			200	110	4
200 mic ( 8 mil )		80		115	6
			120	115	5
			200	115	4
250 mic ( 10 mil )		80		125	6
			120	125	5
			200	125	4
THINFLEX		80		120	4
			120	120	3
			200	125	3
FOIL		80		120	4
			120	125	4
			200	125	3

8.Please wait until " Ready Lamp" is steadily lit.

( If materials are laminated while Ready Lamp is blinking, lamination results may not be good enough ).

9.Once the ready lamp is steadily lit place the lamination pouch with the sealed end first into the entrance of the laminator.

Make sure that you place the laminating pouch	Only laminate whole pouches,	Set temperature according to
with the sealed end first into the entrance of the	DO NOT cut or alter pouches	pouch film thickness.
laminator.	in anyway before laminating.

10.The laminated item will exit the rear of machine.

11.If an item gets jammed press the "Reverse" button to clear the jam.

12.For periods in between jobs set the laminator to "pre-heat" to conserve electricity.

13.Repeat the above steps until all of your lamination is completed. When lamination is completed turn the power off

9