Detail for the operation panel
Temperature window
Temperature control button
Temperature check button 
Hot lamination button
Reverse button
Ready lamp
Speed window
Speed control button
Stand By Button
Cold lamination button
Power On/Off
Power : It starts after pushing button, and it is set temperature 90ºC and speed 6step(75mic+80g) when the start.
Please push the power button when shut off. It is set the temperature 60ºC and speed 2step automatically, then it is stop automatically after for a while.
HOT : After pushing Cold function and Stand By function then pushing HOT button that is set up the temperature 90ºC and speed 6 step automatically. Please control the temperature and speed on it’s requred film specification referring to the manual “Film Termperature and Speed chart”
Cold : Please push the cold button when the lamination of cold film.
Temp : It can be controled 40ºC ~ 160ºC in unit of 1ºC
In case of wide range of temperature, please push the button continuously.
Speed : It can be controled 1~9 step in units of 1step
(Please refer to the manual “Film Termperarure and Speed Chart”)
Start lamp : When not ready, light on and off repeatably
When ready, the lamp light on
Reverse : In case of wrong inserting and rolled film, the machine has a reverse function
Stand By : It is set up the temperature 80ºC and speed 2step automatically. (please use this function when you stop the machine for a while)
6
