3. INSTALLATION
Note: The laminator should be installed by a trained service technician.
The laminator comes fully assembled, except for the feed table, paper guide. Upon arrival, thoroughly inspect the unit. It is imperative that any shipping damage is reported and a claim is filed with the delivering carrier immediately upon receipt.
The laminator should be located in an area with adequate work space for feeding graphics and lamination materials.
Avoid placing the laminator in a dusty area or near sources of extreme heat or cold.
Once the laminator is in place, lock the casters into position(“ON” position). Always unlock the casters (“OFF” position) when moving to a different location.
ELECTRICAL REQUIREMENTS
Royal Sovereign recommends that a licensed electrician ensuresproper power installation to your laminator in accordance with electrical codes in your area.
The laminator should have a dedicated power line.
| MODEL |
|
|
| |||||
|
|
|
|
|
| 120V |
| ||
| Power Supply |
| 50/60HZ |
| 50/60HZ |
| |||
|
|
|
|
| single phase |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
120V UL |
| 230V UL | 240V UK |
|
|
|
|
220V EU | 220V AU |
3
4. INCLUDED WITH LAMINATOR
Thoroughly inspect the parts and the unit. It is imperative that any missing parts are reported and a claim is filed with the reseller immediately upon receipt of shipment.
Part Name |
|
| Quantity | Picture |
Laminator |
|
| 1 |
|
Owner's Manual |
| 1 |
| |
3´´(76mm) / 2" (57mm) Auto Grip | 6/4 |
| ||
|
| 1 |
| |
Dust Cover |
|
| 1 |
|
Spare Motor Fuse - FUSE(50T) | 1 |
| ||
(6.3A) |
|
|
| |
|
|
|
| |
Spare Main Power Fuse - FUSE(65TS) | 1 |
| ||
(5A) |
|
|
| |
|
|
|
| |
8 - 1/4"Hexa head Bolt (M6 | 20mm) | 10/10 |
| |
8 - Spring Washer( | 6.1) |
| ||
(Included with option only) |
|
| ||
12 - 3/16"screw (M5 | 10mm). |
|
| |
12 - Spring Washer( |
| 5.1) | 12/12 |
|
(Included with option only) |
|
| ||
Front Feeder and Rear Rewinder Kit | 2/2 |
| ||
(Included with option only) |
| |||
|
| |||
4 - 1/3"Hexa head Bolt (M8 | 70mm) | 4 |
| |
4 - Spring Washer( | 8.5) |
| ||
(Included with option only) |
|
| ||
4 - 1/3"screw (M8 60mm). |
|
| ||
4 - Spring Washer( | 8.5) | 4 |
| |
(Included with option only) |
|
| ||
NUT M8) |
|
| 4 |
|
4
