RSA Lighting 700ERV specifications Combolight, Next Generation Recessed Single-LampFixture

DESCRIPTION

An adjustable Single-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes ONE (1) PAR38 Metal Halide lamp.

For remodel applications. Insulation must be kept 3” from all sides and at least 1” above the housing.

SPECIFICATION FEATURES

Catalog #

Project

Comments

Prepared by

Type

Date

A.... Housing

Housing and junction box are aluminum, trimless meshplate is steel with powder coated finish. Perforated meshplate allows for trimless installation in drywall/ plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes a beveled “knife-edge” lips to ensure a clean edge. Can accommodate various ceiling thickness.

B.... System Protection:

Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.

C... Junction Box

Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.

D... Electrical

Integral electronic metal halide ballasts are mounted in a separate metal enclosure box attached to the junction box with 18” of flexible conduit. Ballast enclosure includes a separated wiring compartment and two knockouts for conduit entry and features a perforated metal door for easy maintenance access and cooler operation. Entire electrical assembly (jbox and ballast enclosure) is removable from the housing for easy maintenance.

E.... Lamps

One (1) PAR38 Metal Halide lamp mounted in adjustable double gimbal. Lamp holder is removable and may be regressed 1” for additional cut-off. Lamp can accept optical accessories. 45º x 45º locking lamp adjustment. Beveled-edge lamp ring is secured with threadless, bay- onet action. Optional retractable arm is available for lamp pulldown and extreme

aiming. Includes Med. Base socket.

F.... Mounting

Mounting clips are provided which mount the housing edge flush with the finished ceiling line. Mounting clips are secured to the housing through the meshplate with screws.

G... Labels

cULus listed for non-type IC applications, suitable for use in damp locations.

Ceiling Cut-Out: 7.80” x 7.80”

COMBOLIGHT®

Next Generation

Recessed

Single-Lamp Fixture

One (1) Light PAR38 Metal Halide

Remodel Housing Trimless

Double

Gimbal

45º x 45º Adjust

1.70”

For use with 70W or 100W PAR38 Metal halide lamps.

11.31”	9.48”
	9.95”

13.01”	9.45”
		19.70”
	Required
		14.20”
	above
	ceiling	13.38”

	4.10”
Integral Electronic
Metal Halide Ballasts	9.25”	6.69”
Separate Wiring
Compartment			Perforated
			Meshplate
	18” flexible conduit		Thermal
			Protector

ORDERING INFORMATION

C1

R

E

N

N

Configuration			Lamp Type / Wattage Label
C1 = COMBOLIGHT			070M38 =	70 Watt PAR38 Metal Halide
Recessed One (1) Light			100M38 =	100 Watt PAR38 Metal Halide
	Housing
	R =	Remodel

Power Supply

Voltage

1 = 120V

2 = 277V

Power Supply

E = Electronic Metal Halide Ballast

Lamp Mechanism

G = Double Gimbal

R = Retractable Double Gimbal

Trim Insert

N = Trimless

Trim Insert Finish

N = Trimless

Housing Interior/Electrical Door/Sleeve Finish

W = White

B = Black

S = Industrial Silver

Specifications and Dimensions subject to change without notice.

rev 050108

www.cooperlighting.com RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031