Product Configuration
Before You Begin
This section provides instructions for integrating the partners’ product with RSA ClearTrust. This document is not intended to suggest optimum installations or configurations. It is assumed that the reader has both working knowledge of the two products to perform the tasks outlined in this section and access to the documentation for both in order to install the required software components. All products/components need to be installed and working prior to this integration. Perform the necessary tests to confirm that this is true before proceeding.
Installation Prerequisites
Before beginning the RSA ClearTrust – BusinessObjects Enterprise InfoView configuration, make sure that:
-The RSA ClearTrust servers have been installed.
-BusinessObjects Enterprise XIr2 has been installed, including: The
InfoView
-A web server proxy to the application server that hosts BusinessObjects Enterprise has been installed and configured.3
-An RSA ClearTrust Web Server Agent has been installed and tested on the web server proxy.
Configuring BusinessObjects Enterprise XIr2
You can configure InfoView to use RSA ClearTrust for user authentication and
1.Configure the LDAP plug-in
2.Build LDAP user accounts
3.Configure the Trusted Authentication shared secret
4.Add an Enterprise alias to each user account
5.Install the SSO and exit scripts
3Web server proxy configuration is outside of the scope of this documentation. Please refer to the appropriate application server documentation.
Page: 4
