3 | Using a utility knife, cut the long sides of each wall slot tab and then use a screwdriver to knock it out 6 places on Floor Panel (K-5H52) used in the MIDDLE position and 12 places on Floor Panel |
(K-5H52) used in the Back position. |
K-5H52 (BACK POSITION)
K-5H52 (MIDDLE POSITION)
4 | Place the Floor Panel (J-5H51) on the foundation. Connect two Repeat Floor Panels (K-5H52), install Screws (AA) 14 places. |
Optional Step: |
If desired, recessed anchor locations (8 places) can be used to secure the Floor to the Foundation, see Step 1. |
AA (28)
K-5H52 (BACK POSITION)
K-5H52 (MIDDLE POSITION)
Caution: When installing screws do not overtighten.