3.0Wall Panel G Installation
a.Using a screwdriver, punch out the screw holes on the top of Front Left Side (G) 2 places.
Screw Holes
G
G
A
Drill a pilot hole (using 1/8" drill bit) in front lower corner | c. | Snap Front Left Side (G) into Front Floor (A). |
b. at location indicated by screw target. | Hold Front Left Side (G) upright to prevent it from | |
Note: This pilot hole is to be drilled through both walls. |
| falling (until Left Back (D) is installed). |
G
G
click ALIGN
ALIGN
A
