3.2Wall Panel H Installation a.
Using a screwdriver, punch out the screw holes on the
top of Front Right Side (H) 2 places.
Screw Holes
H
H
b. Drill a pilot hole (using 1/8" drill bit) in front lower corner at location indicated by screw target.
Note: This pilot hole is to be drilled through both walls.
c. Snap Front Right Side (H) into Front Floor (A). Hold Front Right Side (H) upright to prevent it from
falling (until Right Back (F) is installed).
H
H
ALIGN click
ALIGN
A
