RuggedCom M2100 Gigabit Ethernet 1000Mbps Modules, Optics, Tx λ, Cable, Order Code, Type2, Power

5.5.2 Gigabit Ethernet (1000Mbps) Modules

For maximum flexibility RuggedCom Inc. offers a number of different transceiver choices for Gigabit fiber optical communications. The following table details fiber optic specifications based on the 2-port modules or pluggable transceivers selected at time of ordering.

	Optics	Mode /		Tx λ	Cable	Tx Pwr
	Order Code	Connector		(nm)	Type2	(dBm) 3
						(Min/Max)
12-11-0036		MM / LC	850		50μ/125	-9.5 / -4
12-11-0027		SM / LC	1310		9μ/125	-9.5 / -3
12-11-0028		SM / LC	1310		9μ/125	-5 / 0

		Rx		Typical	Power
Rx
Sensitivity		Saturation		Distance	Budget
(dBm) 3		(dBm) 3		(km)1	(dB)
-20
	0		0.5		13
-22	-3		10		18.5
-22	-3		25		19.5

NOTES:

1.Maximum segment length is greatly dependent on factors such as fiber quality, and number of patches and splices. Please consult RuggedCom sales associates when determining maximum segment distances.

2.All cabling is duplex type unless otherwise specified.

3.All optical power numbers are listed as dBm averages.

4.These transceivers utilize a distributed feedback (DFB) type laser and are rated for -20°C to +85°C operation only.

27

© 2008 RuggedCom Inc. All rights reserved Rev106