Runco Reflection, CL-710LT manual Selecting Input Source, PIP/ PBP function

Runco CL-710/ CL-710LT User’s Manual

Selecting Input Source

■When this unit is turned on, it will search for the input source you selected last time.

■You may select the input source directly on the remote control.

PIP/ PBP function

■Press the PIP button to enable the PIP function

■For PIP purposes, there are two groups of inputs separated by their display modes:

Video Group: Video, S-Video and Component Y/CB/ CR inputs

Graphic Group: HDTV input and Computer input.

■The PIP can show one input from the Graphic Group within one input from the Video Group, or show one input from Video Group within one input from the Graphic Group.

■Press the PIP button to switch to the main window or turn off PIP function.

■Select the input source of main window by pressing the INPUT button.

■Press the ACTIVE button to switch to the active window. You can change the input signal setting in active window.

■Press PIP+ or PIP- to adjust the size of PIP window.

■Adjust the position of the PIP window with the ARROW keys (c,e,d,f).

■Press PBP to enable the PBP function.

204. Basic Operation