Runco
6. Additional Information
Warning Message
■ It is normal for lamp to be darker when this unit |
|
|
|
|
|
| |
has been used for a period of time. |
| Lamp life is expired ! |
|
■ " Lamp life is expired ! Please change a new lamp. |
|
| |
|
|
| |
And reset the lamp timer" message will be |
| Please change new lamp |
|
displayed for 30 seconds on the screen if the lamp |
| And reset the lamp timer |
|
has operated for 950 hours. |
|
| |
|
|
| |
|
|
|
|
|
|
|
|
■ " Please change the lamp, Lamp will exceed its |
|
|
|
|
|
| |
lifetime after (hours):" message will be displayed |
| Please change the lamp ! |
|
on the screen for 30 seconds for each time turning |
|
| |
| Lamp will exceed its |
| |
on, if the lamp has operated for 980 hours. And |
|
| |
the number will count down continuously. |
| lifetime after (hours): |
|
|
|
|
|
|
|
|
|
■ "Please change the lamp !" message will display on |
|
|
|
|
|
| |
the screen all the time and the POWER LED will |
|
|
|
blink in orange and green sequentially if the lamp |
| Please change the lamp ! |
|
has operated for more than (1,000) hours. |
|
| |
■ The power will turn off automatically after 10 |
|
|
|
minutes. |
|
|
|
|
|
|
|
|
|
|
|
Replace the Lamp (Contact your Runco Dealer)
1. Loosen the screw of | 2. Take off the front lamp | 2 | |
front lamp cover | cover. | ||
|
| 1 |
3. Loosen the two | 4. Pull out the lamp |
screws of lamp | module horizontally. |
module. |
|
5. Insert the new lamp | 6. Tighten the two screws |
module into this | of lamp module. |
projector |
|
horizontally until it |
|
is securely in place. |
|
6. Additional Information 27
