18
SETUP OPTIONS
The SETUP portion of the PROJECTOR OPTIONS menu controls various global aspects of the pro-
jector's functions. This menu contains five pages, and are described below:
On PAGE 1, the following may be adjusted:
ORIENTATIONchanges the image orientation. The image can be set for DESKTOP FRONT
(floor/front), CEILING REAR, DESKTOP REAR and CEILING FRONT.
16:9 POSITION is a coarse shift adjustment that allows a 16:9 image to be displayed on either the
CENTER (default), TOP or BOTTOM of the device. This is extremely helpful in installations where the
Vertical Offset (see page 7) cannot be precisely attained. Please refer to the drawings below:
Active Video Area
Active Video Area
Active Video Area
TOP Position CENTER Position (default) BOTTOM Position
The 16:9 POSITION feature can be used in lieu of angling the projector and using keystone, and
can ONLY be used on 16:9 screens and CANNOT be used if an anamorphic lens is installed on the
projector.
When this is set for either TOP or BOTTOM, the Anamorphic and 4:3 aspect ratios will automatically
go to the selected position. The LETTERBOX aspect ratio must be manually moved into the desired
position. To do this, please perform the following:
1. Set the 16:9 POSITION to the desired position (top or bottom).
2. Ensure that "DEFINE SCREEN TYPE" is set to 16:9 screen (see page 20)
3. Select the ANAMORPHIC aspect ratio and ensure it is properly centered on the screen. Make
any SHIFT adjustments as necessary.
4. Select the LETTERBOX aspect ratio (it will be in the center of the device and but not centered on
the screen). Go to the SHIFT control and adjust the vertical position of the letterbox aspect ratio so
it is properly centered on the screen.
BACKGROUND: When no signal is input, the projector can display either a BLUE background, a
BLACK background or a white background with the Runco logo.
MOUSE: Not used on this model
PAGE 2 of the SETUP OPTIONS menu contains adjustments for service personnel only.