![QUICK SET-UP GUIDE](/images/new-backgrounds/25437/2543727x1.webp)
QUICK SET-UP GUIDE
Getting Started
To get started using your
1.Ensure all sources that you are using are properly connected to the
2.Turn on all sources. If a A/V receiver or a RUNCO
3.Turn on the
4.Turn on the projector.
5.With the left or right buttons on the front panel or remote, select the desired source. You may also do this by going through the menu (see pg. 14).
6.Select the desired aspect ratio by using the up and down buttons on the front panel or the remote. You may also do this by going through the menu. For an explanation of Aspect ratios, please refer to pg. 18.
12