![Quick Set-up Guide](/images/new-backgrounds/25437/2543725x1.webp)
Quick Set-up Guide
Connection Examples
RUNCO
12v Fuse | | | | | |
RS-232 IN | V | H | B | G | R Pass-through Y Pr Pb S-VIDEOCOMPOSITE RS-232 OUT |
Mask Screen
| | | Projector |
| RUNCO | DVD Player | VCR, Laser |
| Projector |
| | disc player, |
Phast or | | | camcorders |
| | |
Crestron | Computer or | Sattelite | |
| |
| DTV decoder | |
| receiver or | |
| | |
| | SVHS player | |
While there are many different ways to connect your source equipment to your VHD-4403 ULTRA, the examples shown above are the most common and are recommended by Runco.
• COMPOSITE VIDEO INPUT:
Composite video is the most common type of signal used, but is also the lowest in picture quality. Many sources have outputs that are limited to composite video, such as most VCR’s and some camcorders; others such as Laser Disc players actually produce slightly better results when using composite video. While the VHD-4403 ULTRA has an excellent decoder for composite video, it is recommended that composite video be used only if necessary.
• S-VIDEO INPUT
S-video is the second-best type of signal that can be used, but is MUCH better than compos- ite video. Using such sources as Satellite receivers, high-quality VCRs and DVD players (with no component output) will produce a MUCH cleaner and sharper signal. Decoder artifacts that are associated with composite video (dot crawl and ‘rainbows’) are non-existent when using S-video.
• COMPONENT INPUT
Component video is the best type of signal that can be used. The most common sources that use component outputs are DVD players, and it is highly recommended that component be used when possible. Component video goes one step beyond S-video in picture quality; chro- ma (color) information is more resolved and the overall picture appears more well-defined.
• PASS-THROUGH
This input is used to ‘pass-through’ any high-definition or computer signals that do not require processing. The signal by-passes the VHD-4403 ULTRA’s processing and is sent directly to the projector. The pass-through may be used for COMPONENT outputs from a DTV decoder, a progressive-scan DVD player or RGB outputs from a computer.