8 en Description | |
|
|
2Description
The EX36(N) Night Vision Camera has been designed with tilt on its faceplate to allow corner mounting and t provide better angle views in small rooms. The housing and faceplate consist of tough materials to withstand damage in hostile environments such as prison cells and psychiatric wards.
The smooth compact housing allows for tight installations without exposed wiring or mounting screws, while separate windows for the camera lens and LEDs result in a perfect picture without light rebound.
A photocell circuit is used to provide automatic on/off infrared operation.
The voltage regulator circuit allows for 12 VDC or 24 VAC operation, and a range in between. This regulator also provides protection from voltage surges, transient spikes, and reverse voltage.
2.1Unpacking
This electronic equipment should be unpacked and handled with care. Check the parts list below and confirm that all items are included. Inspect the equipment thoroughly to ensure that nothing was damaged in transit.
Contact a Bosch Service Center if a problem is noted. Please refer to Section 1.2 Bosch Contact Information, page 7 for contact information in your area.
2.2Parts List
2.2.1Parts Included with the Product
The following items are supplied with the unit:
–EX36(N) camera assembly
–installation instruction booklet
–Plastic bag containing one hex key for removal of faceplate mounting screws
F.01U.172.707 3.0 2011.02 | Instruction Manual | Bosch Security Systems, Inc. |
