Runco VX-1000d RS-232 Communications

RS-232 Communications

Baud rate: 19200 (fixed)

Bits: 8

No Parity

All protocol in ASCII format

RS-232 input connector pin numbers: TxD= Pin# 2, RxD= Pin# 3, GnD= Pin# 5

Command format (single command): command value (i.e. brightness 100).

NOTE: A space (not an underscore) or comma may be used between the command and its value.

Command string format: command,command value, command etc.

(i.e. COMPOSITE,BRIGHTNESS 100,ANAMORPHIC,<CR>)

NOTE: In between commands, a comma or space may be used

NOTE: A carriage return must be used after each command or string.

Other notes:

• For command strings, a maximum of 255 characters can be used in a single string.

• PARAMETER min/max refers to a function's minimum and maximum value range. Inputting values above or

below their range may cause unpredictable (but not fatal) results.

Contents

Main Table of Contents Page Introduction Features Warnings and Safety Precautions PRODUCT DISPOSAL INFORMATION Declaration of Conformity SAFETY TIPS Limited Warranty LIMITED WARRANTY Page Features and Benefits Projector Description Input Panel Top View Projector Placement and Offset Information Ceiling Mount Configuration Floor Mount Configuration SCREEN __________ (H) x __________ (W) DHD Controller Description Front Panel Rear Panel OUTPUTS: INPUTS: Remote Control Description 14 Quick Set-up Guide OUTPUTS Connection Examples IR HD1 HD2 PROJECTOR CONFIGURATION ISF Calibration Overall Functional Description Menu Description and Navigation Main Menu Opening Screen Input Source Aspect Ratio Picture X Page X Basic Troubleshooting Tips PROBLEM POSSIBLE CAUSE SOLUTION Page RS-232 Communications General Information COMMAND PARAMETER (min/max) Value stored? DESCRIPTION RS-232 Commands COMMAND PARAMETER (min/max) Value stored? DESCRIPTION Specifications VX-1000d Projector: DHD Controller: Supplied Accessories