Runco VX-2000d manual Picture Brightness Contrast Color Tint Sharpness

Operation

Table 4-1. Aspect Ratio Settings (continued)

Aspect Ratio		Description
Cinema			Select Cinema to view 2.35 source
			material in its native aspect ratio.
			With a 16:9 screen and a non-CineWide
			projector (no anamorphic lens), the
	2.35:1 Image on		upper and lower portions of the screen
	16:9 Screen
			are masked, but the geometry of the
	(Cinema aspect ratio / no CineWide)
			active image area is unchanged.
			With a 2.35:1 screen and a
			CineWide-equipped projector, the DHD
	2.35:1 Image on		Controller scales the 2.35:1 image so
	2.35:1 Screen		that the active image area fills the 16:9
	(Cinema aspect ratio / CineWide)
			chip surface, eliminating the black bars.
			The secondary, anamorphic lens then
			restores the proper geometry to the
			2.35:1 image.
Virtualwide 2.35			A 16:9 image is scaled NON-linearly
			(more on the sides than in the center) to
	16:9 IImage on		fit a 2.35:1 screen. Virtualwide 2.35 is
	22..35:1 Screen		available only on the
			VX-2000d/CineWide and only on the
			analog inputs (HD/RGB, SD
			Component, Composite and S-Video).
	16:9 Image on
	2.35:1 Screen with
	VirtualWide 2.35

Use the controls in the Picture Menu to calibrate your VX-2000d for optimum picture quality.

The VX-2000d has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from Runco video display devices. Accordingly, Runco recommends that setup and calibration be performed by an ISF certified installation technician.

All signal types require separate processing. Therefore, you need to calibrate each input separately.

When you change a picture quality setting, save the change to a

Note preset afterwards. Otherwise, the change will be lost when a different input is selected. (Picture quality settings are saved for each input and resolution separately.) For information about saving settings, refer to ISF Presets on page 46.

Picture

Picture

Brightness

Contrast

Color

Tint

Sharpness

Runco VX-2000d Owner’s Operating Manual 41