Runco VX-2000d - page 82

Serial Communications
70 Runco VX-2000d Owner’s Operating Manual
PRELIMINARY
TRIGGER 1/3 YES Assigns trigger to currently-selected aspect
ratio
The following serial commands are meant to emulate buttons on the remote control or DHD Con-
troller front panel. Each button has its own serial command, so effectively it is as if you were using
the IR remote only you’ll be doing so via serial commands. These commands provide active OSD
responses just like the IR remote.
DOWN NA NA Down-Arrow ( ) key
ENTER NA NA ENTER key
LEFT NA NA Left-Arrow ( ) key
MENU NA NA MENU
RIGHT NA NA Right-Arrow ( ) key
UP NA NA Up-Arrow ( ) key
Table 6-1. Serial Commands (continued)
Command Parameter
(min/max)
Value
Stored? Description