COMMAND | PARAMETER (min/max) | Value stored? | DESCRIPTION |
|
|
|
|
!STORE | NA | YES | Stores the current set of values |
|
|
| (all values) into |
|
|
| memory |
!RESTORE | NA | YES | Restores the stored values |
!FACTORY | NA | YES | Restores all values to factory |
|
|
| default levels |
!STATUS | NA | NA | Asks the Controller to provide |
|
|
| the hardware information, |
|
|
| current values and system status |
|
|
| to the automation system |
!RESTART | NA | NO | Restarts the DHD Controller |
|
|
| (same as turning it on and off) |
!ECHO | NA | NO | Enables the Controller to echo |
|
|
| back commands and values to |
|
|
| the automation system |
!NOECHO | NA | NO | Disables the Controller's |
|
|
| character echoing |
!INSTALLMODEOFF | NA | NA | Disables the Installation menu |
|
|
| (removes it from the main menu) |
!INSTALLMODEON | NA | NA | Enables the Installation menu |
|
|
| (enables it on the main menu) |
!SERVICEMODEON | NA | NA | Enables the service mode |
!SERVICEMODEOFF | NA | NA | Disable the service mode |
RGAIN | NO | Adjust the Red level of image | |
GGAIN | NO | Adjust the Green level of image | |
BGAIN | NO | Adjust the Blue level of image | |
ROFFSET | NO | Adjust the Red level of image | |
GOFFSET | NO | Adjust the Green level of image | |
BOFFSET | NO | Adjust the Blue level of image | |
RGamma | NO | Adjust the Red gamma of image | |
GGamma | NO | Adjust the Green gamma of | |
|
|
| image |
BGamma | NO | Adjust the Blue gamma of image | |
IRCODE | 013 | NO | Changes the IR Code Set of the |
|
|
| Controller to 013 |
IRCODE | 215 | NO | Changes the IR Code Set of the |
|
|
| Controller to 215 |
IRCODE | 510 | NO | Changes the IR Code Set of the |
|
|
| Controller to 510 |
IRCODE | 918 | NO | Changes the IR Code Set of the |
|
|
| Controller to 918 |
IRCODE | 0 | NO | Disables the IR receiver |
35
