Russell Hobbs RH1261TW Trouble Shooting, Body, Drum, Fault, Possible Cause, Removing Methods

Body

Clean the outer body of your machine with warm water and a non-inflammable cleaning agent that will not abrade the body of your machine. After rinsing with some water, dry using a soft and dry cloth.

Drum

Do not leave metallic objects such as needles, paper clips, coins, etc. in your machine. These objects will lead to formation of rust stains in the drum. To clean such rust stains, use a non-chlorine cleaning agent and follow the instructions of the manufacturers of the cleaning agent. Never use wire wool or similar hard objects for cleaning rust stains.

Trouble Shooting

All repairing operations required for your machine should be carried out by a qualified engineer. Contact an engineer on 01204 664 084. If your machine requires a repair or if you cannot remove the fault by the help of the information provided as follows:

∙Unplug your machine.

∙Turn the tap off.

∙Contact the nearest authorised service.

FAULT	POSSIBLE CAUSE	REMOVING METHODS
	Discharging hose clogged	Check the discharging
Your machine does not	or twisted.	hose.
	Pump filter clogged.	Clean the pump filter.
discharge water.
	Laundry settled in the	Spread your laundry in the
	machine unevenly.	machine evenly.
	The feet of your machine	Adjust the feet on your
	have not been adjusted.	machine.
	Safety assembly fitted for	Disassemble the safety
Your machine vibrates.	transport not	assembly of your machine.
	disassembled.	(**)
	Less amount of laundry in	This will not block
	the appliance.	operation of your machine.
	Your machine overloaded	Do not put in laundry more
	with laundry or laundry	than the amount

For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084 -28-